JOTUN JOTAFAIR EPOXY FILLER 1LT BASE A
This is a two component solvent free epoxy fairing compound/filler. It has excellent application properties, high
strength, good sandability and minimal shrinkage during cure. To be used as part of a complete coating system
in atmospheric and immersed environments. Suitable for properly prepared carbon steel and composite surfaces.
Colours
light green
Typical use
Apply by trowel or fairing board to smooth-out (fair) surface deflections on metal or composite substrates of
yacht exteriors.
Other
Approved 1
Product data
Property Test/Standard Description
Solids by volume
Gloss level (GU 60 °) ISO 2813
VOC-EU IED (2010/75/EU) (calculated)
The provided data is typical for factory produced products, subject to slight variation depending on colour.
100
Flash point ISO 3679 Method 1 100 °C
matt (0-35)
0 g/l
Gloss description: According to Jotun Performance Coatings' definition.
All data is valid for mixed paint.
ISO 3233 %
Film thickness per coat
Dry film thickness
Wet film thickness
Theoretical spreading rate
Typical recommended specification range
500
500
2
10000
10000
0,1
µm
µm
m²/l
-
-
-
Surface preparation summary table
Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.
strength, good sandability and minimal shrinkage during cure. To be used as part of a complete coating system
in atmospheric and immersed environments. Suitable for properly prepared carbon steel and composite surfaces.
Colours
light green
Typical use
Apply by trowel or fairing board to smooth-out (fair) surface deflections on metal or composite substrates of
yacht exteriors.
Other
Approved 1
Product data
Property Test/Standard Description
Solids by volume
Gloss level (GU 60 °) ISO 2813
VOC-EU IED (2010/75/EU) (calculated)
The provided data is typical for factory produced products, subject to slight variation depending on colour.
100
Flash point ISO 3679 Method 1 100 °C
matt (0-35)
0 g/l
Gloss description: According to Jotun Performance Coatings' definition.
All data is valid for mixed paint.
ISO 3233 %
Film thickness per coat
Dry film thickness
Wet film thickness
Theoretical spreading rate
Typical recommended specification range
500
500
2
10000
10000
0,1
µm
µm
m²/l
-
-
-
Surface preparation summary table
Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.